SCHOEPS
CCM (COMPACT CONDENSER MICROPHONES) AND ACCESSORIES


 

Compact Condenser Microphones

Accessories

 
 
 
CCM-L VERSION WITH QUICK-DISCONNECT LEMO CONNECTOR
 

FEATURES:

  • miniature professional microphone
  • balanced XLR-3 output
  • 12V-48V phantom powering
 
CCM
CCM on TC
 

The innovative CCM (Compact Condenser Microphone) from Schoeps is a very small yet fully professional microphone. It is a major step forward in the miniaturization of classic condenser microphone technology. The familiar CMC microphone amplifier is eliminated in applications where there is no need to interchange capsules, thus minimizing the risk of mechanical damage. In place of the KC- active cable, the CCM has an XLR plug which connects directly to any 12-48 Volt phantom-powered input. Its sturdy cable is attached either permanently or with a quick-disconnect Lemo plug.

Although the CCM is only the size of a Colette Series capsule with an active cable, it has the same audio circuitry and performance as a complete CMC + MK Colette microphone. However, it goes beyond the limits of present active-cable technology, as its balanced, low-impedance output guarantees a very high immunity to interference, even with cable runs of several hundred meters. All other specifications are the same, the polar and frequency response plots of the CCM Series are identical to those of the corresponding MK- capsules of the Colette Series.

The CCM mirrors all the well-known capsule varieties of the Colette Series, except for the MK 5, MK 6, BLM 3 and the BLM 03 C. The type designation is formed by adding the corresponding capsule designation. For example: "CCM 2 S" = CCM 2 S omni capsule characteristic.

A miniature swivel stand coupler (SGC) is included. Most of the windscreens and miniature accessories of the Colette Series can also be used with the CCM Series.

Technical data
     Current consumption: 8 mA at 12V, 4 mA at 48V
     Source impedance: 90 Ohms

Dimensions
     Diameter: 20 mm
     Length: 45 mm
     Weight: 33g

Surface finish: "TV-gray," non-reflective Nextel

Cable length: 5 m. Other cable lengths can be specified but the microphone's storage case will not hold cables longer than 10 m

 

Please note: Compact Condenser Microphones are available in two styles, the CCM-L and the CCM-U. The CCM-L has a quick-disconnect Lemo connector at the head of its cable, terminated by an XLR-3M at the other end. The CCM-U also terminates in an XLR 3M connector, but is hardwired to its cable.

All models listed below are CCM-Ls. CCM-Us are available for the same price.

 

Please see our COMPACT CONDENSER MICROPHONES listing

 
For the T2 CCM 4 Desktop tiltable Double Cardioid Microphone, see below.
 
 
 
HEADSETS
Professional
$ net
HS 2S Omnidirectional headset microphone for extremely noisy locations (racetrack, factory, airfield, etc.)
Discontiued
HS 4VXS Headset microphone for extremely noisy locations (racetrack, factory, airfield, etc.)
Discontiued
 
 
 
COMPACT CONDENSER MICROPHONE ACCESSORIES
Professional
$ net
AF 1 Mounted-in-surface rubber shockmount for CCM, S 250 LU, or CMXY 4V
$216.00
BLCg

Plate for mounting CCM (or MK+KC) mikes for directional boundary layer pickup, 100 mm diameter

$162.00
K 1 BU
K 1 UMK
K 1 USK
K 2 LU
K 5 ISK
  Please Inquire For Pricing
K 5 LU 5 meter (16') cable with Lemo to XLR-3M, for CCM_L mics and RL Tubes
$84.00
KLY 250/0 l KLY 250/0.25 I, 16" Y-Cable with (2) Lemo connectors for (2) CCM_L to Binder 5-Pin Female $246.00
KLY 250/0 SU KLY 250/5 SU,16" Y-Cable with (2) Lemo connectors for CCM_L to XLR 5-pin Male $225.00
KLY 250/5 I KLY 250/5 I, 5 m (16') Y-Cable with (2) Lemo connectors for CCM_L to Binder 5-Pin Female $260.00
KLY 250/5 SU KLY 250/5 SU, 5 m (16') Y-Cable with (2) Lemo connectors for CCM_L to XLR 5-pin Male $235.00
KMSC M-S Stereo conversion clip mounts a CCM 8 (or MK 8 + KC) on CMC, CMBI or CMIT 5U mikes
$15.00
RL 350g Extension tube for stand-mounting CCM-L with RG 8 swivel extension (included) on STR support rod. Use with K 5 LU cable. $453.00
RL 700g $463.00
RL 1200g $472.00
RLG 350 Ug Dual-swivel stand (350 mm) for mounting CCM on podium or tabletop. XLR-3M output.
$472.00
OSIX CCM LU OSIX CCM LU, CCM Shockmount for boom pole use, XLR-3M output $273.00
OSIX CCM LL OSIX CCM LL, CCM Shockmount for boom pole use, Lemo output $273.00
OSIX CI OSIX CI, Shockmount with integral KC 5g, includes Binder disconnect, for MK and CMC $756.00
OSIX CMR I OSIX CMR I, Shockmount with integral 5 meter CMR, Binder disconnect, for MK, specify approved wireless model $849.00
S 420 L5Ug Long gooseneck for CCM-L, 5 m (16') cable with XLR-3M connector. Use with K 5 LU cable. Stiff lower section (6") mounts on 3/8" stud.
$409.00
S 170 L 170mm Gooseneck for hanging of CCM_L (in between microphone and K5 LU cable), *matte black finish standard color.
$276.00
S 250 L5Ug Gooseneck (10") with 5 m (16') cable
$329.00
S 250 LUg Gooseneck (10") with XLR-3M
$293.00
RS 420 L5Ug 420mm (17") CCM_L gooseneck/tube, Flex section at base, 5m cable to XLR-3M
$354.00
SRS 420 L5Ug As RS 420 L5Ug above, Flex section at both base and capsule end
$409.00
STV 900/1400 L3Ug Telescoping microphone stand 900 mm-1400 mm; 3 m (10') cable with XLR-3M
$724.00
T2 CCM 4g T2 CCM 4g, Double Tabletop Mic w/(2) CCM 4, Special Order only
$4,999.00
C2 CCM 4 Ug C2 CCM 4Ug, Double Tabletop Mic with (2) CCM 4 to XLR-5M

$3,899.00

TR 200 Lg Table stand for CCM-L, dual-swivel 200 mm (8") arm
$645.00
TSR 200 Lg Fully adjustable desk stand/intergrated gooseneck for CCM_L, requires K 5 LU
$623.00
 

Go to SCHOEPS CATALOG page
 
Go to Product Index
Tel (212) 242-3737Credit Cards acceptedFax (212) 924-1243
 

© 1997-2015 Posthorn Recordings

Most recent revision March 24, 2015