SCHOEPS
MOUNTS AND SUSPENSIONS |
|
A 22 / A 22
S Dual Mounts
A 2-20 S Under-Desk
Elastic Suspension
H 20g Cable
Hanger
SG 20 Stand
Clamp
SG 22 Stand
Clamp
SG 22 MOD
Stand Clamp
T 20g / TA 20g
Table Stands
Z 10 Universal
Clamp |
|
|
|
|
A 22 Dual Mount
Dual A 20 mount for 2
CMC- + MK- (not for stereo)
Price: $233.00
A 22 S Dual Mount
Dual A 20 S mount 2 CMC-
+ MK- + CUT and/or GVC (not for stereo)
Price: $233.00 |
|
|
|
|
|
A 2-20 S Under-Desk
Elastic Suspension
Dual A 20 S mount for
under-desk elastic support of CMC with SKC, or ST 20 3/8 with STC,
S 250 LSU, S 420 LSU, etc.
Inquire for Price |
|
|
|
|
|
|
|
H 20g
Cable Hanger
For a
microphone with a 20 mm diameter.
Suspends a Colette Series
microphone from its cable and adjusts it vertically and horizontally
in nearly any position. An easily adjustable metal clamp not only
grips the cable but allows a line to be attached for positioning
the microphone.
Price: $173.00 |
|
|
|
|
|
HC Miniature Cable Hanger
This accessory is used when hanging an MK capsule on a KC Active Cable or a CCM Compact Microphone. Incorporated in its design is the SGC swivel which allows orientation to any angle laterally, and vertically to any angle from 0° to 100°.There is very little danger of an Active KC Cable or the cable of a CCM twisting (e.g. as a result of rising temperature) after it has been suspended.
The HC is suitable only for use with the CCM-U or the Active Cable KC (see also here) because of the cable diameter. If used with the CCM-L (which has a thinner cable), the mounting should be secured additionally with adhesive tape.
Color: gray
Price: $48.00 |
|
|
|
|
|
SG
20 Stand Clamp
Single-microphone version,
for a microphone with a 20 mm diameter.
The SG 20 holds any microphone
of the Colette Series. Its metal base has a 5/8"-27 NS internal thread.
A threaded adapter is supplied for mounting on 3/8"-16 and
1/2"-13 studs. The angle can be varied continuously in the
vertical plane.
Color: gray
Price:
$69.00 |
|
|
|
|
|
SG
22
Dual-microphone version
of the SG 20.
A two-microphone
version of the SG 20 in which the angle between the microphones
can be varied as well as the overall angle of inclination. It is
not recommended for stereo pickups because of the very limited angle
and spacing possible between the microphones. It is normally used
to hold backup microphones in situations where a single pickup is
deemed too risky. In the mid-position the microphones are oriented
perpendicular to the vertical support rod or microphone stand.
Color: gray
Price:
$77.00 |
|
|
|
|
|
SG
22 MOD
Dual-microphone version
of the SG 20.
A two-microphone
version of the SG 20 in which the spacing between parallel microphones
can be varied (4 mm to 52 mm) as
well as their overall angle of inclination. In its midposition the
microphones are oriented parallel to the vertical support rod or
microphone stand.
Color: gray
Price:
$85.00 |
|
|
|
|
T 20g
TA 20g |
T 20g
/ TA 20g
Table Stand
T 20g: table stand for a microphone with 20 mm diameter. A light
but sturdy solid metal tripod with variable-angle clamp, to hold
a Colette microphone.
Price:
$198.00
Table Stand
TA 20g: As above, but with an elastic suspension.
Price:
$295.00 |
|
|
|
|
|
Z
10 Universal
Clamp
Clamps to any pipe or
table-top up to 65 mm thick. Two interchangeable pieces can be locked
into its hollow handle: a rigid stud with 3/8"-16 threads,
for mounting additional extensions or accessories, and a two-piece
interlocking and extendable rod with a ball-and-socket head. This
has a 1/4" stud, and adapters to 3/8"-16 and 5/8"-27
NS threads, for fastening a microphone mount.
Surface finish: black
crackle and chrome
Price: $128.00 |
|
|
|